Zyrobond Thread Sealant

AN 3572

Low Strength

Suitable for coarse threads with high tolerances.

  • Ideal for taps and valves, sprinkler and water spray installations, gas systems and central heating plants.
  • For medium pressure liquid, gas and water systems.
  • Thread-Ø: max. 2″ (M50)
  • Working Time: 45 – 60 min
  • Temperature Resistance: bis +150°C

Size / Art. Nr.

Size 50 ml 250 ml
Art. Nr. 10 3572 03 10 3572 04

Strength Low Strength
Fixing Time (min) 45 – 60
Functional Cure (hrs.) 6 – 8
Viscosity (cps) 17000 – 50000
Gap Fill Maximum (mm) 0,30
Thread-Ø Maximum (inch) 2
Thread-Ø Recomm. (mm) < 50
Strength Breakaway Torque (Nm²) 7
Prevail Torque (Nm²) 3
Temp. (°C) 150
Specific Gravity 1,25
Technical Data
Safety Data Sheet

Thread Sealant

Anaerobic adhesives for sealing fittings, hydraulic and pneumatic connections.

Special Features:

  • Prevent friction.
  • Protect against pressure and temperature fluctuations, vibration, impact and load transfer.
  • Prevent fretting corrosion.
  • Bridge large tolerances.

Instructions for use

The surface must be clean, dry and free of contaminants such as oil or grease.

Assembly

Apply the product to the thread in a 360° ring, the first thread should be left free. Ensure that the spacing between the threads is sufficiently filled. For coarse threads it is also recommended to apply the product to the internal thread. An activator can be used to accelerate curing.

Disassembly

Low and medium strength anaerobic adhesives can be disassembled using standard hand tools. High strength anaerobic adhesives must be heated to 250°C – 300°C.

Cleaning

Lay the cured product in solvent and then mechanically remove the residue.

Note:

These products are not suitable for pure oxygen and/or oxygen-rich systems and should not be used as a sealant for chlorine or strong oxidizing media.