Modelling & Repair Film

Modelling Film:

For modelling, forming and applying dual-component adhesives

Reinforced Repair Mesh

  • For constructive adhesive applications.
  • The combination of reinforced mesh and dual-component adhesive provides a stiff, high strength repair.
  • Typical application areas include bumpers, headlights cab parts, interior panels, spoilers and plastic containers.
Modelling Film Modelling Film
12,5 cm x 3,6 m
Reinforced Repair Mesh
12,5 cm x 3,6 m
Art. Nr. 12 9236 01 12 9236 02

Instructions for use

  1. Ensure surface is clean, dry and free of contaminants such as oil or fat.
  2. Sand the damaged spot on both sides with grain 80 sandpaper. Grind a 50 mm-long V-shaped depression (with a grinder) and sand this again with grain 80 sandpaper.
  3. Blow clear the repair area with compressed air and then spray with a solvent. Wipe both sides with a clean cloth. The adhesive surface should be perfectly clean. The adhesive application can be carried out after 2 minutes.
  4. Cut a suitable piece of Reinforced Repair Mesh, apply the PUR 6101 to the Repair Mesh and bring onto the damaged area within 50 seconds.
  5. Immediately press as much adhesive as possible from the back through the V-depression, apply the Modelling Film to the front and model the mass as required. Avoid direct skin contact.
  6. Remove both foils after 15 minutes and sand the surface. (Use grain 80 and then grain 180 for final sanding). High speeds or high temperatures should be avoided.