STX Tape

Unique, self-vulcanising sealing tape for fast and efficient repair, sealing, identification and insulation.

STX TAPE* is WRAS certified according to BS 6920. Suitable for contact with drinking water.

Size
25,4 mm
25,4 mm
25,4 mm
25,4 mm
25,4 mm
25,4 mm
25,4 mm
25,4 mm
Art.  Nr. 23 1025 00 23 1025 02 23 1025 03 23 1025 04 23 1025 05 23 1025 06 23 1025 07 23 1025 08
Base Material Methyl-Vinyl-Silicone Rubber
Colours Transparent, White, Grey, Red, Blue, Yellow, Green, Orange,*Black
Dimensions 25,4 mm x 9 m (stretched length)
Thickness 0,50 mm
Tensile Strength 49 kg/cm²
(ASTM D412)
Maximum Elongation 350 %
Tear Strength 10,5 N/min
(ASTM D624, Die B)
Pressure Resistance 8 bar (maximum)
Contact Resistance 1.0×10¹³ Ohm.m
(ASTM D257)
Dielectric Thickness 400 Vpm/min
(ASTM D149)
Brittle Point -54 ºC
(ASTM D2137)
Temperature Resistance -45 ºC to +200 ºC
(Intermittent -65 ºC to +260 ºC)

STX Tape

Self-Vulcanising Sealing Tape

Special Features:

  • Provides a permanent, air and watertight insulation.
  • Exceeds Military Specification MIL-I-46852C.
  • Resistant against acids, oils, fuels, solvents, UV-rays and salt-water.
  • Problem-free sealing even on damp surfaces.

Areas of Application

Electrical installation, plumbing, heating and air conditioning, construction and municipal enterprises, motor vehicles, industrial plants, agriculture, marine, etc.

Application Examples

  • Corrosion protection of metal pipes and conduits.
  • Temporary repair of water and heating pipes.
  • Closure of thermal bridges in open areas.
  • Insulating, sealing and repair of cables, pipes and hoses.
  • Colour coding of wires, pipes, cables and ropes.
  • Bundling cables and electrical installations.
  • Insulation on solar panels and satellite dishes.
  • Closing slits and joints in pipe insulation.
  • Emergency repair of engine hoses and exhaust pipes.
  • Temporary repair of air leaks and radiator hoses.
  • Insulating tools, hand rails and handles.
  • Cable identification and protection against unravelling on forestry and boat ropes.

Instructions for use

The product must be heavily stretched and wrapped tightly over the surface to be protected. Overlap by at least 50%. The end of the tape should be overlapped completely with the last wrap. A high pressure seal on water hoses can be achieved in combination with FTX Tape (flexible adhesive tape). STX Tapes are to be stored away from heat, dust, moisture, direct sunlight and solvent vapours. Recommended storage temperature +10°C to +30°C.