Zyrobond Cyanoacrylate Adhesive

CA 3460

Low Viscosity

Superglue for bonding small parts with thin adhesive layers

Low bloom and low odour.

  • Specifically designed for critical cosmetic bonding.
  • For use in applications with inadequate ventilation.
  • Suitable for plastics, metals, precious metals, glass, acrylic, etc.
  • White Label Product
Size 20 g
Art. Nr. 14 3460 02
Gap Fill 0,15 mm
Fixture Time 5 – 70 sec.
Viscosity 45 cps
Temperature Resistance -53 °C to +71 °C

Cyanoacrylate Adhesive

Instant adhesive for bonding difficult surfaces providing a high industrial strength.

Special Features:

  • React with contact to humidity.
  • Protect permanently against contact corrosion and fretting corrosion.
  • Ideal for small gaps and for securing plastic screws.
  • Especially suited to fixation.

Instructions for use

The surface must be clean, dry and free of contaminants such as oil or grease. The best results are achieved when the surface is slightly abraded before bonding.

When using an activator is to note that the activator should be applied to one side and the adhesive to the other side.

When bonding O-rings, a piece should be truncated at both ends to get a clean surface, this type of application achieves the best possible strength.

Bonding time: Under normal conditions, the hardening process is initiated by the surface or air moisture. The functional strength for bonds with cyanoacrylate adhesives is very fast, however a curing time of at least 24 hours should be allowed in order to achieve optimum chemical/solvent resistance. The curing time is dependent on the respective material.


Fresh and cured adhesive can be removed with Zyrobond Debonder. Plastics and painted surfaces are to be checked for suitability before use